Commercial / Industrial Tap Water Thin Film RO Membranes

Membrane Model	Permeate Flow Rate		Size (Dia" × Length")	Minimum Salt Rejection (%)	Stabilized Salt Rejection (%)	Specification Sheets
Membrane Model	Gals/Day	Liters/Day	Size (Dia" × Length")	Minimum Salt Rejection (%)	Stabilized Salt Rejection (%)	Specification Sheets
M-T2013A	100	378	2.0 × 13	96	98
M-T2013AHF	130	492	2.0 × 13	96	98
M-T2026A	220	833	2.0 × 26	96	98
M-T2026AHF	280	1060	2.0 × 26	96	98

M-T2514A	200	757	2.5 × 14	98	99
M-T2514AHF	250	946	2.5 × 14	98	99
M-T2521A	325	1230	2.5 × 21	98	99
M-T2521AHF	405	1533	2.5 × 21	98	99
M-T2540A	850	3217	2.5 × 40	98	99
M-T2540AHF	1060	4012	2.5 × 40	98	99

M-T4014A	525	1987	4.0 × 14	98	99
M-T4014AHF	655	2479	4.0 × 14	98	99
M-T4021A	900	3407	4.0 × 21	98	99
M-T4021AHF	1125	4258	4.0 × 21	98	99
M-T4040A	2400	9084	4.0 × 40	98	99
M-T4040AHF	3000	11355	4.0 × 40	98	99

Note: Performance specifications based on 2,000 mg/l sodium chloride, 225 psi (1.6 MPa) applied pressure, 77°F (25°C) feed water temperature, pH 8 and 10% recovery. Element permeate flow may vary ± 15%.

Reverse Osmosis Membrane Element
Actual sizes pictured below

DIMENSIONS

Model No.

L
Inches	Cm

I
Inches	Cm

D
Inches	Cm

M-T2013A, HF

33.0

10.64

1.8

4.6

M-T2026A, HF

66.0

23.64

1.8

4.6

M-T2514A, HF

35.6

2.5

6.4

M-T2521A, HF

53.3

2.5

6.4

M-T2540A, HF

101.6

2.5

6.4

M-T4014A, HF

35.6

3.9

9.9

M-T4021A, HF

53.3

3.9

9.9

M-T4040A, HF

101.6

3.9

9.9

RECOMMENDED OPERATION CONDITIONS

Maximum operation pressure	300 psi (2.1 MPa)
Maximum feed flow rate - 2" Elements 2.5" Elements 4" Elements	3 gpm 6 gpm 17 gpm
Maximum operating temperature	113° F (45° C)
Maximum feed water turbidity	1 NTU
Maximum feed water SDI (15min)	4
Chlorine tolerance	0
Feedwater pH range, Continuous Operation	2-11
Feedwater pH range, Short-Term Cleaning (30min)	1-12
Minimum brine flow to permeate flow ratio	5:1