AMI 不锈钢外壳
AMI 多筒式不锈钢液体过滤器外壳是适用于大容量过滤的高质量解决方案。我们的多筒式外壳可容纳 5 至 22 个标准长度为 30 英寸和 40 英寸的滤芯,液体过滤流量高达 616 加仑/分钟(140 立方米/小时)。
AMI 商业和工业过滤器外壳液体容器非常适合用于化学系统、商业 RO 和膜水处理系统的预过滤、高纯度水、后过滤、食品和饮料、工业设施等。
我们始终备有大量商用和工业用不锈钢液体外壳库存。图中所示的大多数型号均有现货,可立即发货。
AMI 316 Stainless Steel Commercial Industrial Filter Housings with Electropolish Finish
Model No. |
Flow Rate* |
Houses Cartridges† |
Inlet/ Outlet |
Vent |
Drain |
||
gpm |
m3/hr |
Qty. |
Length |
||||
C-0530-2F-316LEP |
105 |
24 |
5 |
30 |
2 Flange |
¼ NPT |
½ NPT |
C-0730-2F-316LEP |
147 |
33 |
7 |
30 |
2 Flange |
¼ NPT |
½ NPT |
C-0740-2F-316LEP |
196 |
45 |
7 |
40 |
2 Flange |
¼ NPT |
½ NPT |
C-1230-3F-316LEP |
252 |
57 |
12 |
30 |
3 Flange |
¼ NPT |
½ NPT |
C-1240-3F-316LEP |
336 |
76 |
12 |
40 |
3 Flange |
¼ NPT |
½ NPT |
C-2230-4F-316LEP |
462 |
105 |
22 |
30 |
4 Flange |
¼ NPT |
½ NPT |
C-2240-4F-316LEP |
616 |
140 |
22 |
40 |
4 Flange |
¼ NPT |
½ NPT |
*Flow rates shown are based on 7 gpm/TIE 25 micron string wound filter cartridge and clean water (viscosity cp = 1) at 2psid. Flow rates are for guide lines only. Actual flow rates will vary based on fluid, viscosity, cartridge type, micron ratings and other factors.
†Housing will accept standard 2.5 OD Filter cartridges in the following lengths: 30=(29¼ or 30) or 40=(39 or 40)
AMI 304 Stainless Steel Commercial Industrial Filter Housings with Poly Coat Finish
Model No. |
Flow Rate* |
Houses Cartridges† |
Inlet/ Outlet |
Vent |
Drain |
||
gpm |
m3/hr |
Qty. |
Length |
||||
C-0520-2F-304PC |
70 |
16 |
5 |
20 |
2 Flange |
¼ NPT |
½ NPT |
C-0530-2F-304PC |
105 |
24 |
5 |
30 |
2 Flange |
¼ NPT |
½ NPT |
C-0540-2F-304PC |
140 |
32 |
5 |
40 |
2 Flange |
¼ NPT |
½ NPT |
C-0730-2F-304PC |
147 |
33 |
7 |
30 |
2 Flange |
¼ NPT |
½ NPT |
C-0740-2F-304PC |
196 |
45 |
7 |
40 |
2 Flange |
¼ NPT |
½ NPT |
C-1230-3F-304PC |
252 |
57 |
12 |
30 |
3 Flange |
¼ NPT |
½ NPT |
C-1240-3F-304PC |
336 |
76 |
12 |
40 |
3 Flange |
¼ NPT |
½ NPT |
C-2230-4F-304PC |
462 |
105 |
22 |
30 |
4 Flange |
¼ NPT |
½ NPT |
C-2240-4F-304PC |
616 |
140 |
22 |
40 |
4 Flange |
¼ NPT |
½ NPT |
*Flow rates shown are based on 7 gpm/TIE 25 micron string wound filter cartridge and clean water (viscosity cp = 1) at 2psid. Flow rates are for guide lines only. Actual flow rates will vary based on fluid, viscosity, cartridge type, micron ratings and other factors.
†Housing will accept standard 2.5 OD Filter cartridges in the following lengths: 20", 30=(29¼ or 30) or 40=(39 or 40)
More Stainless Steel Liquid and Water Filter Housings are being added to our inventory soon. Contact us with your requirements.
|
|
Benefits of AMI Stainless Steel Filter Housings
- No Lead Time! In stock for immediate shipment.
- Band V-Clamp Top Closure for Quick and Easy Cartridge Replacement
- Side-In and Side-Out Connections for Easy Installation and Service
- Available with Threaded or Flanged Fittings for Easy Installation
- Housings are Compatible with Industry-Standard 2.5” OD, 30” & 40” Filter Cartridges, for Widely Available Replacements
- Heavy-Duty Stainless Steel Construction for Durability and Reliable Performance
- Available with 304 or 316 Stainless Steel
- AMI Products have earned an industry-wide reputation for their high quality and superior performance
- 100% Quality Control Inspected in our ISO 9001:2015 certified facility in USA.
AMI 不锈钢过滤器外壳特点
- 适用于标准 30 英寸或 40 英寸滤芯 - 每个容器可容纳 5 至 22 个滤芯
- 带 V 型夹顶部闭合
- 内置排水和排气口
- 结构材料:
- 316L 不锈钢(电解抛光)或 304 不锈钢(聚酯涂层)
- 丁腈橡胶 O 型圈
- 操作限制:
- 最大工作压力: 150 psi (10 bar)
- 最高工作温度:250°F (120°C)
- 流量高达 616 GPM
AMI 不锈钢过滤器外壳的应用
|
|
AMI 带夹式液体容器滤芯
AMI 不锈钢过滤器外壳相关文献
排序方式