HM Digital Dual TDS Monitors measure the tap water coming in vs. the purified water going out of your water filtration system at any time.
Single TDS Monitors, ideal for any water filtration system including reverse osmosis systems, coolers and more, display TDS level of a single water line.
|
Model No. |
Description |
Measures |
Range |
Sensors |
Accuracy |
|
DM-1 |
In-Line Dual TDS Monitor |
TDS |
Dual Range: |
Dual |
± 2% |
|
DM-2 |
Commercial In-Line Dual TDS Monitor With Additional Features |
TDS |
Dual Range: |
Dual |
± 2% |
|
SM-1 |
In-Line Single TDS Monitor |
TDS |
Dual Range: |
Single (1) |
± 2% |
|
QC-1 |
Quick Check “Push to Check” Monitor with Green “Good” and Red “Service” Lights. Eight programmable set points. |
TDS & Conductivity |
0-5,000 ppm |
Single (1) |
± 3% |
|
DM-1 Dual Inline TDS Monitor |
DM-2 Dual Inline TDS Monitor |
SM-1 Single Inline TDS Monitor |
|
QC-1 Single Inline TDS Monitor |
QC-1 Single Inline TDS Monitor in Use |
Note: Tee fitting (sold separately) with a 1/4" connection is required for installation. Refer to Applied Membranes part # F-4UT44QC (1/4" Tube) or F-6UT64QC (3/8" Tube).
Additional Features of DM-2:
