手动 SDI 套件 - SDI-2000

给水中的悬浮固体和胶体物质是反渗透系统面临的最大问题之一。污泥密度指数 (SDI) 是衡量此类污垢问题的常用指标，其原理是将 0.45 微米的过滤器置于压力下，接触给水，并计算过滤速率。在大多数情况下，对于反渗透系统来说，SDI 小于 5 是可接受的。

AMI 的直接 SDI 测试套件完全组装在便携式紧凑盒中，可随时进行现场测试。

包含 ASTM 粉尘密度指数测量说明。最低要求水压为 30 PSI。对于低于 30 PSI 的压力，可选配泵组件。

Model No.	Description
SDI-2000	Portable SDI Test Kit Assembly with Standard Filter Housing (SDI-FH2 housing, photograph in parts tab)
SDI-2000-MIL	Portable SDI Test Kit Assembly with Millipore^® Brand Filter Housing (SDI-FH housing, photograph in parts tab)

SDI filters are sold separately and are recommended to be purchased with the silt density index kit.

SDI-045

Filters for SDI Testing, 0.45 Micron, 47 mm, Package of 100

Ensure optimum performance of reverse osmosis systems by verifying the feed water SDI is within acceptable limits.
SDI Testing before a system installation can determine any pretreatment required during system design.
Test manifold is built into a portable travel case with easy connection/disconnection for on-site testing.
Optional booster pump assembly (sold separately) is available for testing feed sources with pressures below 30 psi.
Manufactured in our ISO 9001:2015 Certified Facilities

Direct SDI Silt Density Index Testers Made in our ISO 9001:2008 Certified Facilities AMI is a Member of the Water Quality Association

Completely assembled in a portable contact case.
Quick Connect Style In/Out connections built into the product panel for fast and easy connection/disconnection.

Assembly Includes:

Test kit includes two SDI filters. An additional filter pack should also be purchased. See “Parts” tab for ordering information.

Pump Assembly Kit for testing with less than 30 psi. Assembled with Booster Pump, Power Supply, Pressure Regulator:

Model No.	Description
SDI-045	Filters for SDI Testing, 0.45 Micron, 47 mm, Package of 100
SDI-FH2	Filter Holder for SDI Kit (SDI-2000)
SDI-FH	Filter Holder for SDI Kit (SDI-2000-MIL)

SDI-045

SDI-FH2

SDI-FH

已添加至购物车：