Low Energy Reverse Osmosis RO
Systems
Series
XL - 2,000 - 10,000 GPD @ 100-140 PSI
Designed to
produce low dissolved solids water from tap or well water
at lower pressures, these Reverse Osmosis systems use extra low
energy reverse osmosis membranes. The product water is used in
applications such as spot free rinse, water stores, whole house, labs, ice
makers, humidification, misting and a wide variety of other applications
for water purification.
Series XL Reverse Osmosis
Systems use 4” Diameter, 40” long
XLE membrane elements.
Pressure vessels containing membrane elements are mounted in a vertical
position. For ease of operation and maintenance, the Series
XL is designed to
accommodate panel mounted controls and instrumentation. |
Picture shows RO system with optional equipment. |
|
Key Features:
- Over 20 years of experience is
reflected in our quality
- Compact, Heavy Duty, Powder Coated
Frame
- Proven components used throughout the
system
- Conservatively engineered for reliable
long term performance
- Factory tested to ensure trouble-free
operation
|
 |
|
STANDARD EQUIPMENT Series XL RO Systems |
-
Extra-Low Energy
Thin Film
Composite Membranes
-
Stainless Steel
Pressure Vessels
-
Stainless Steel Multistage Pump
-
5 Micron
Filter and Housing
-
Low Pressure Pump
Protection
-
Product Flowmeter
-
Concentrate
Flowmeter
-
Tank Level
Controls (Floats Optional)
-
Flow Control Valve
-
Concentrate
Recycle Valve & Flow Meter
|
-
4 Pressure Gauges:
Concentrate Pressure Gauge, Filter In, Filter Out,
Membrane Inlet
-
Heavy Duty Powder
Coated Frame
-
Microprocessor Controller with:
-
Illuminated
On/Off Power Switch
-
Pretreatment
Lock-Out and Indicator Light
-
Tank Full
Indicator Light and Shut-Down (float switches for tank not included)
-
Hour Meter
|
|
OPTIONAL EQUIPMENT Series XL RO Systems |
-
Float Tree for
Atmospheric Storage Tank
-
Second 5 Micron
20” Filter and Housing
-
Fiberglass
Pressure Vessels
-
Temperature Gauge
-
Permeate Quality (TDS)
Digital Monitor
|
-
Upgraded
microprocessor controller, ROC 150D
-
Pre-treatment
Equipment*
Carbon System, Water Softener, Media Filter, Chemical Dosing
-
Crating*
|
* Recommended minimum options.
|
|
Capacity |
Qty. of
4×40 Membrane Elements (XLE) |
Line
Sizes (In/cm) |
Dimensions (In/cm) |
Approx.
Shipping
Weight
(lb/kg) |
|
GPD |
m³/day |
Inlet |
Perm. |
Conc. |
Length |
Width |
Height |
|
XL-14A |
2,000 |
7.5 |
1 |
0.75/2 |
0.38/1 |
0.75/2 |
20/51 |
20/51 |
54/138 |
275/125 |
|
XL-24A |
4,000 |
15 |
2 |
1/2.5 |
0.5/1.3 |
0.75/2 |
20/51 |
20/51 |
54/138 |
300/136 |
|
XL-34A |
5,800 |
22 |
3 |
1/2.5 |
0.5/1.3 |
0.75/2 |
20/51 |
25/64 |
54/138 |
325/147 |
|
XL-44A |
7,500 |
28 |
4 |
1/2.5 |
0.5/1.3 |
0.75/2 |
20/51 |
25/64 |
54/138 |
350/159 |
|
XL-54A |
9,000 |
34 |
5 |
1/2.5 |
0.5/1.3 |
0.75/2 |
20/51 |
32/82 |
54/138 |
375/170 |
|
XL-64A |
10,000 |
38 |
6 |
1/2.5 |
0.5/1.3 |
0.75/2 |
20/51 |
32/82 |
54/138 |
400/181 |
| NOTES |
-
All dimensions and
weights are approximate.
-
Systems rated at
77°F (25°C) using 500 TDS solution and
140 psi (9.8
kg/cm²) pressure. System capacity changes significantly with water
temperature. For higher TDS a water analysis must be supplied and could
result in modifications to the system.
-
Chlorine must be
removed prior to RO system if present in the feed water.
-
Water must be
pretreated using a softener or antiscalant to avoid scaling the membranes.
|
| Ordering
Information Series XL RO Systems |
|
Please add our voltage codes to the end of the model number when ordering.
Example: XL-14A-216 = 220v/1ph/60Hz
Voltage Codes: 216 = 220v/1ph/60hz
116 = 110v/1ph/60hz 215
= 220v/1ph/50Hz |
| Replacement
Parts & Consumables for XL Reverse Osmosis Systems |
|
|
This page was last updated
10/30/06
|
