|
Twin Water Softeners with Metered
Valves
Ideal for situations where uninterrupted flow of soft
water is a must, our twin softeners consist of two resin tanks. One resin tank
is always in service, while the other tank is in standby. When the meter
determines that the resin is near its capacity, it will switch the tank in
standby to be in service, and the tank containing the exhausted resin switches
into regeneration, and then into standby.
Please Select a Product Below
AMI Water Softeners Product
Specifications
|
Water Softener Model No. |
Volume of Media (Cu.
Ft.) |
Flow Rate (GPM)* |
Backwash Flow (GPM) |
Fleck Valve Head |
Tank Size
(Dia"xH") |
Brine Tank Size
(Dia"xH") |
In/Out Connections
(In.) |
Approx. Ship Weight (lbs.) |
|
Per Tank |
Total |
5gpm/ft² |
15gpm/ft² |
| W-S744ST-*** |
0.4 |
0.8 |
1 |
4 |
1.5 |
9000 |
7 x 44 (2) |
18 x 33 |
3/4 |
135 |
| W-S844ST-*** |
0.5 |
1.0 |
2 |
5 |
2 |
9000 |
8 x 44 (2) |
18 x 33 |
3/4 |
145 |
| W-S940ST-*** |
0.7 |
1.4 |
2 |
6 |
2 |
9000 |
9 × 40
(2) |
18 x 40 |
1 |
155 |
| W-S1040ST-*** |
1.0 |
2.0 |
2 |
7 |
3 |
9000 |
10 × 40 (2) |
18 x 40 |
1 |
175 |
| W-S1054ST-*** |
1.5 |
3.0 |
2 |
7 |
3 |
9000 |
10 × 54 (2) |
18 x 40 |
1 |
235 |
| W-S1252ST-*** |
2.0 |
4.0 |
4 |
12 |
4 |
9000 |
12 × 52 (2) |
18 x 40 |
1 |
415 |
| W-S1354ST-*** |
2.5 |
5.0 |
4 |
14 |
5 |
9000 |
13 × 54 (2) |
18 x 40 |
1 |
435 |
| W-S1465ST-*** |
3.0 |
6.0 |
5 |
16 |
6 |
9000 |
14 × 65 (2) |
24 x 41 |
1 |
485 |
| W-S1665ST-*** |
4.0 |
8.0 |
7 |
21 |
7 |
9000 |
16 × 65 (2) |
24 x 41 |
1 |
635 |
| W-S2162ST-*** |
8.0 |
16 |
13 |
36 |
12 |
9500 |
21 × 62 (2) |
30 x 48 |
1.5 |
1035 |
| W-S2472ST-*** |
10 |
20 |
15 |
47 |
15 |
9500 |
24 × 72 (2) |
39 x 48 |
1.5 |
1535 |
| W-S3072ST-*** |
15 |
30 |
24 |
74 |
25 |
2900 (2) |
30 × 72 (2) |
39 x 48 |
2 |
2035 |
| W-S3672ST-*** |
20 |
40 |
35 |
106 |
35 |
3150 (2) |
36 × 72 (2) |
39 x 60 |
2 |
2835 |
| W-S4272ST-*** |
30 |
60 |
48 |
144 |
50 |
3900 (2) |
42 × 72 (2) |
42 x 60 |
3 |
4135 |
| W-S4872ST-*** |
40 |
80 |
60 |
188 |
60 |
3900 (2) |
48 × 72 (2) |
60 x 60 |
3 |
|
*5 gpm per sq.ft. of water softener media is the best
design condition for filtration. For relatively clean water, you may go up
to design criteria of 15 gpm per sq. ft. Backwash flow rate for
water softener is based on 25 psi pressure drop.
***Please add the appropriate voltage code
to the end of the water softener model number when ordering.
Example: W-S940ST-116
|
110v/60Hz = 116 |
220v/60Hz = 216 |
220v/50Hz = 215 |
Notes:
- Twin systems are configured for alternate regeneration.
Stainless Steel Jacket Adder
for Twin Water Softeners
If you would like to order a water softener with a Stainless Steel Jacket,
please order the appropriate option from the below table along with your water
softener model number. Note: Since twin water softeners include two
resin tanks, two option #'s must be ordered - one for each tank.
|
SS Jacket Option # |
For Water Softener Resin Tank Size:
(Dia. x Height) |
| A950-940 (x2) |
9" × 40" |
| A950-1040 (x2) |
10" × 40" |
| A950-1054 (x2) |
10" × 54" |
| A950-1252 (x2) |
12" × 52" |
|
|
SS Jacket Option # |
For Water Softener Resin Tank Size:
(Dia. x Height) |
| A950-1354 (x2) |
13" × 54" |
| A950-1465 (x2) |
14" × 65" |
| A950-1665 (x2) |
16" × 65" |
|
Other
sizes are not available with SS Jacket Option |
|
| 
