Mineral Injection Systems

Applied Membranes mineral injection systems are designed to inject minerals in to drinking water. One to four minerals can be injected at one time. The systems are designed for flow rates from 1 to 30 gallons per minute. Larger flows are possible by adding the increased line size option below. A typical system would inject three minerals: calcium, potassium and magnesium. The injection systems meet all IBWA, FDA and health code requirements.

Key Features:

Over 25 years of experience is reflected in our quality
Proven components used throughout the system
Conservatively engineered for reliable long term performance
Factory tested to ensure trouble-free operation

Standard Equipment

Skid mounted on a heavy duty powder coated frame.
Adjustable Liquid metering pumps
Solution Mixers
Solution Tanks, Food-Grade Polyethylene
Low level tank safe-guard
In-Line static mixer

Flow sensitive batch controller
TDS monitor with set-point and alarm
Schedule 80 PVC and Polyethylene Piping
Connect directly into main piping, 1.5” to 2”
NEMA 4 Electrical Enclosure

Ordering Information

Model No.	Qty. of Chemical Tanks	Metering Pump Size		Line Size
Model No.	Qty. of Chemical Tanks	GPD	PSI	Line Size
Y-CHMSK1	1	24	60	Up to 2"
Y-CHMSK2	2	24	60	Up to 2"
Y-CHMSK3	3	24	60	Up to 2"
Y-CHMSK4	4	24	60	Up to 2"

Optional Equipment

2.5" to 4" Line Size for Higher Flows
pH Monitoring
Crating

Voltage/Ordering Information

Please add our voltage codes to the end of the model number when ordering.
Example: Y-CHMSK1-116 = 110v / 1 ph / 60 hz
- 116 = 110v/ 1ph/ 60hz
- 216 = 220/230v/1ph/ 60hz
- 215 = 220/230v/1ph/ 50hz

Top of page

For prompt, courteous and reliable service, contact us today!