VIQUA Sterilight Vending (PV) Ultraviolet (UV) Disinfection Systems

The VIQUA (R-Can) Sterilight Vending UV systems have been specifically designed for requirements found in OEM application of vending machines and dispensing equipment. The unique design incorporating a separate reactor vessel and ballast lends itself to installation inside the equipment. This space saving design when coupled with the electronic ballast offer reduced heat build-up and application flexibility. The unit features convenient screw terminals for both input power and dry contacts (NO or NC).

A hard glass germicidal lamp provides an economical way of treating all your vended water and provides a 99.99% reduction of bacteria, virus and protozoan cysts (Cryptosporidium and Giardia lamblia). This process is accomplished without adding any harmful chemicals to your vended water. Ultraviolet Disinfection is the most ecological way of treating your water.

Features & Specifications Sterilight UV Systems;

99.99% destruction of bacteria, virus & protozoan cysts (Giardia lamblia & Cryptosporidium) at rated flow without the addition of harmful chemicals.
Open end quartz sleeves and retaining nuts for optimum operating temperature and sealing efficiency.
Optimum UV output over a wide range of input voltages, Constant lamp current over entire input voltage range. Not affected by frequency variations (47-63Hz)
Increased energy efficiency.
Increased ballast life & cooler operating temperatures
Reactor Chamber Material: 304 SS
Ambient Water Temperature: 36-104°F (2-40°C)

Sterilight Vending (PV) Ultraviolet (UV) Disinfection Systems

Sterilight Vending Ultraviolet Water Disinfection Systems

Model #	Flow Rate at Doses listed below (GPM)			Overall Dimensions (LxDxH)	Cell Diameter	In/Out Port Size	Power Consumption	Lamp Watts	Weight lbs
Model #	@ 16 mj/cm2 (US Public Health Standard)	@ 30 mj/cm2 (Industry Standard)	@ 40 mj/cm2 (NSF/EPA Standard)	Overall Dimensions (LxDxH)	Cell Diameter	In/Out Port Size	Power Consumption	Lamp Watts	Weight lbs
S2Q-PV	4	3	2	2.5" x 17" x 2.5"	2.5"	1/2" MNPT	19W	17W	6
S5Q-PV	11	6	4.5	2.5" x 21" x 2.5"	2.5"	3/4" MNPT	26W	24W	7
S8Q-PV	20	10	7.8	2.5" x 35" x 2.5"	2.5"	3/4" MNPT	39W	37W	10

Note: System Models above are for 110v, USA.

To order European Style, add "/2" to the end of the model number (Example: S2Q-PV/2).
European systems are shipped with 2-prong continental European (cee-7/7), 2 pin with ground “schuko” power cord.
To order Australian Style (as 3112) Powercord add "/2A" to the end of the model number (Example: S2Q-PV/2A)
To Order order with a UK (bs 1363) power cord – add "/2B" to the end of the model number (Example: S2Q-PV/2B)
To order bare leads – add "/2C" to the end of the model number (Example: S2Q-PV/2C)

Replacement Parts for Vending Ultraviolet UV Water Systems

Replacement Lamps and Quartz Sleeves- Cobalt Series

For System	UV Lamp	Quartz Sleeve
S2Q-PV	S330RL	QS-330
S5Q-PV	S463RL	QS-463
S8Q-PV	S810RL	QS-810

Other Replacement Parts-Cobalt Series

Model No.	Description
410867	O-Ring for Quartz Sleeve
BA-ICE-V	Electronic ICE Ballast (100-240v/50-60Hz)

Top of page

For prompt, courteous and reliable service, contact us today!